Brands
 
Shopping Cart
0 items
 

IH151NK power & control w/box

IH151NK power & control w/box
Click to enlarge
Price: $329.06
Availability: In Stock *
Model: IH151NK
Manufacturer: Tektone
Average Rating: Not Rated

The PK151A provides power and control circuits to
operate TekTone®’s Tek-CARE®NC150, NC200 and
NC110 nurse call systems. The PK151A unit contains the
electronic circuitry necessary to detect the presence of
normal and emergency calls, and to generate audible and
visual control signals. It provides steady or intermittent
voltages to operate visual signaling devices. The PK151A
supports up to 1 amp of current load from field devices,
and supports interconnection of a secondary power supply
(PK800A) to increase the output current load to 3 amps.
Protective circuitry has been incorporated to protect routine
and emergency call commons from shorts.
• UL® 1069 Listed.
• High-quality integrated circuitry and electronic
components.
• Rugged extruded aluminum case.
• Provides steady light and slow tone for normal call;
flashing light and rapid tone for emergency call.
• Routine and emergency commons incorporate shortprotection
circuitry.
SPECIFICATIONS
Dimensions: Height: 9.50" (240 mm)
Width: 2.375" (60 mm)
Depth: 2.25" (57 mm)
Construction: Electronic components mounted on a
printed circuit board and housed in a
rugged extruded aluminum case.
Connections: Screw terminals.
Temperature: 0°C–50°C.
Mounting: Surface-mounted (within 50' of master
station).
Power: 24 VAC, 30VA.
Specifications are the minimum requirement for system
operation. Some systems may require additional
equipment. Contact your factory representative.
REQUIRED COMPONENTS
Tek-CARE®NC110, NC150 or NC200 Nurse Call System
— for higher current applications add —
PK800A 24 VDC Power supply
FZ151 In-line 4A fuse connector
SS100 24 VAC, 100VA Transformer
PK151A
ARCHITECTS’ AND ENGINEERS’
SPECIFICATION
The power and control unit shall be TekTone® PK151A or
approved equal. The PK151A shall provide power and
control circuits to operate audible and visual signals for
emergency and normal calls of a complete nurse call
system. Normal calls must be indicated by a steady light
and slowly repeating tone signal. The control unit shall
automatically cancel the normal audible signal during
intercom use. The unit shall contain all of the electronic
circuitry needed for the features and functions mentioned
above. The PK151A shall support up to 1 amp of current
load from field devices. It shall also support interconnection
of a secondary power supply to increase the output current
load to 3 amps (use TekTone®’s PK800A Power Supply).
Regular and emergency common lines shall be protected
against shorted connections. It shall be mounted on a
printed circuit board and housed in a rugged extrudedThe IH151N Housing is used as a central junction point for
wiring in the CM800 and Tek-CARE® NC110, NC150, NC200
systems.
Knockouts are included on all sides except lid to allow the
connection of electrical conduit from any direction. In
addition, the lid has a knockout which can be used to install
an optional key lock—the TekTone® HW231 or equivalent.
A single-gang electrical junction box is mounted inside the
main enclosure to allow protected electrical connections
to be made. The enclosed electrical junction box is
galvanized steel with a stainless steel cover plate.
• Maintenance free
• Easy Installation
• 19-gauge steel construction
• Knockouts provided
• UL® 1069 Listed when constructed with PK151A
Annunciator Power & Control Unit and SS106
Transformer
SPECIFICATIONS
Dimensions: Height: 11.75" (300 mm)
Width: 11.75" (300 mm)
Depth: 3.75" (96 mm)
Construction: 19 gauge, cold-rolled steel
ARCHITECTS’ AND ENGINEERS’
SPECIFICATION
Housing shall be TekTone® IH151N housing or approved
equal. The IH151N housing shall be of steel construction
for durability. It shall include a single-gang metal junction
box to protect electrical connections.
Knockouts shall be provided on all sides except lid to
facilitate easy connection of electrical conduit. The lid
shall have a knockout for an optional key lock—TekTone®
HW231 or equivalent.
All exposed surfaces shall be either stainless steel or
painted to protect against oxidation. The outer enclosure
shall be composed of 19-gauge cold-rolled steel.
 

Write Review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

There are no additional images for this product.
There are no related PDFs for this product.
* In stock may mean in stock at our supplier. If time is of the essence please email us to check on local stock of the item before placing an online order.